Components and components location Component Location 1. Front seat back frame assembly2. Front seat cushion frame assembly Repair procedures Replacement • Put on gloves to prevent hand injuries.
Components[General type]1. Rear seat back assembly [LH]2. Rear seat back assembly [RH]3. Rear seat back armrest4. Rear seat cushion assembly [General type]1.
Repair procedures Inspection1.Connect the battery voltage and check the blower motor rotation.Replacement1.Disconnect the negative (-) battery terminal.2.Disconnect the blower motor connector (A) and then remove the blower motor (B) after loosening the screws.
Repair procedures Inspection1.Measure the resistance between the terminals.2.The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor)Replacement1.Disconnect the negative (-) battery terminal.