Hyundai Elantra: Smart Key / Unlocking your vehicle (When the Two Press Unlock feature is off)

Hyundai Elantra (CN7) 2021-2025 Owner's Manual / Convenient Features / Accessing Your Vehicle / Smart Key / Unlocking your vehicle (When the Two Press Unlock feature is off)

1. Make sure you have the smart key in your possession.

2. Press the Door Unlock button (2) on the smart key, press the button on the front door handle or touch the door unlock sensor inside of the front door handle to unlock the doors.

3. All of the doors will unlock. When the doors unlock, the hazard warning lights will blink two times.

The door handle button will only operate when the smart key is within 28~40 inches (0.7~1 m) from the outside door handle.
If you do not open the door after unlocking within 30 seconds, it will return to the lock mode.
If you unlocked the door with the door handle, the doors cannot be locked with the sensor for up to 2 seconds.

Locking your vehicle (Touch sensor type)

1. Close all doors, engine hood and trunk. 2. Carry the smart key. 3. Either touch the touch sensor on the door handle (the engraved part) or press the Door Lock button (1) on the smart key...

Unlocking your vehicle (When the Two Press Unlock feature is on)

1. Make sure you have the smart key in your possession. 2. Press the Door Unlock button (2) on the smart key, press the button on the front door handle or touch the door unlock sensor inside of the front door handle to unlock the doors...

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: Troubleshooting

Troubleshooting Symptom Possible cause Remedy Hard steeringImproper front wheel alignmentCorrectExcessive turning resistance of lower arm ball jointReplaceLow tire pressureAdjustNo power assistRepair and replacePoor return of steering wheel to centerImproper front wheel alignmentCorrectPoor or rough rideImproper front ..

Hyundai Elantra (CN7) 2021-2025 Service Manual: Battery Sensor

Description and operation DescriptionVehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as there diverse sensors giving a variety of information. Battery sensor is mounted on battery (-) terminal. It transmits battery voltage, current, temperature information ..

Rear center seat belt

When using the rear center seat belt, the buckle with the “CENTER” mark must be used.

WARNING

Make sure that the seatback is locked in place when using the rear center seat belt.

If not, the seatback may move when there is a sudden stop or collision, which could result in serious injury.