Hyundai Elantra: Smart Key / Unlocking your vehicle
(When the Two Press Unlock feature
is on)
1. Make sure you have the smart key in
your possession.
2. Press the Door Unlock button (2) on
the smart key, press the button on the
front door handle or touch the door
unlock sensor inside of the front door
handle to unlock the doors.
3. The driver’s door will unlock.
4. If you press the button on the front
door handle or touch the door unlock
sensor inside of the front door handle
to unlock the doors within 4 seconds,
all of the doors unlock. When the
doors unlock, the hazard warning
lights will blink two times.
- The door handle button will only
operate when the smart key is within
28~40 inches (0.7~1 m) from the
outside door handle.
- If you do not open the door after
unlocking within 30 seconds, it will
return to the lock mode.
- The factory default setting is in off
mode so you should set in the User’s
Settings mode.
- If you unlocked the door with the door
handle, the doors cannot be locked
with the sensor for up to 2 seconds.
Two Press Unlock Feature
The priority for unlocking the driver door
only, or unlocking all the doors with
one press may be adjusted in the User
Settings mode in the cluster LCD display.
The Two Press Unlock feature, when
enabled, will require the user to press
the door unlock button once for driver
door only and twice for unlocking all the
doors.
Select or Deselect the Two Press Unlock
feature in the User Settings mode in the
cluster LCD display. The option can be
found under the following menu:
User Settings → Door → Two Press Unlock
Information
If you press the front passenger outside
door handle with the smart key in your
possession, all the doors will unlock.
1. Make sure you have the smart key in
your possession.
2. Press the Door Unlock button (2) on
the smart key, press the button on the
front door handle or touch the door
unlock sensor inside of the front door
handle to unlock the doors...
Trunk opening
To open:
1. Make sure you have the smart key
in your possession and either press
inside the trunk emblem or press the
Trunk Unlock button (3) on the smart
key for more than one second...
Other information:
Engine Overheat Troubleshooting
Inspection
Remedy
Visual inspectionInspect for shortage of coolant in reservoir tank .Reinspect after replenishing coolant.Inspect for coolant pollution after removing radiator cap...
Components and components location
Component Location 1. Radiator grill
Repair procedures
Replacement[General type]
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...