Hyundai Elantra: Sunroof / Resetting the sunroof
The sunroof may need to be reset if the following conditions occur:
-- The battery is discharged or disconnected or the sunroof fuse has been replaced or disconnected.
-- The sunroof control lever is not operating correctly.
1. Turn the ignition switch to the ON position or start the engine. We recommend resetting the sunroof while the engine is running.
2. Close the sunroof completely if opened.
3. Release the sunroof control lever.
4. Move the sunroof control lever forward in the direction of close until the sunroof moves tilt up. Then, release the lever.
5. Move the sunroof control lever forward in the direction of close, until the sunroof operates as follow again: Tilt down → Slide Open → Slide Close
NOTICE
Do not release the lever until the operation is completed. If you release the lever during operation, try again from step 2.
6. Release the sunroof control lever after all operation has completed. (The sunroof system has been reset.)
Information
- If the sunroof does not reset when the vehicle battery is disconnected or discharged, or related fuse is blown, the sunroof may not operate normally.
- For more detailed information, we recommend that you contact an authorized HYUNDAI dealer.
Sunshade
The sunshade will open automatically
with the sunroof when the glass panel
moves. If you want it closed, move the
sunshade manually.
NOTICE
The sunroof is made to slide together
with the sunshade...
Sunroof open warning
• If the driver removes the ignition
key(smart key : turns off the engine)
when the sunroof is not fully closed,
the warning chime will sound for a
few seconds and a warning image will
appear in the LCD window...
Other information:
Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Remote start
You can start the engine and turn on the climate system by pressing the remote start button (5) outside the vehicle. To start and stop engine remotely : 1. Press the door lock button (1), and then the hazard warning lights blink once to alert you...
Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Corrosion protection
Protecting your vehicle from corrosion By using the most advanced design and construction practices to combat corrosion, HYUNDAI produces vehicles of the highest quality. However, this is only part of the job. To achieve the longterm corrosion resistance your vehicle can deliver, the owner’s cooperation and assistance is also required...
Categories
- Manuals Home
- 7th Gen Hyundai Elantra Owners Manual
- 7nd Gen Hyundai Elantra Service Manual
- Instrument Cluster Control
- Exterior Overview
- Function settings
- System operation
- Integrated Thermal Management Module (ITM)
Steering wheel audio control
.png)
The steering wheel audio control switches are installed for your convenience.
NOTICE
Do not operate audio remote control buttons simultaneously.
VOLUME (VOL + / VOL -) (1)
Move the VOLUME toggle switch up to increase volume. Move the VOLUME toggle switch down to decrease volume.