Hyundai Elantra: Emission Control System
Repair procedures
Inspection1.Turn ignition switch OFF and disconnect the negative (-) battery cable.2.Remove the fuse box cover.3.Remove the starter relay (A)...
DescriptionEmissions Control System consists of three major systems.•
Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere...
Other information:
Setting
Blind-Spot Safety
With the engine on, select or deselect
‘Driver Assistance → Blind-Spot Safety’
from the Settings menu to set whether or
not to use each function.
-- If ‘Warning Only’ is selected, the
system will warn the driver with a
warning message and an audible
warning depending on the collision
risk levels...
Engine Oil and Filter
The engine oil and filter should be
changed at the intervals specified in the
maintenance schedule. If the vehicle
is being driven in severe conditions,
more frequent oil and filter changes are
required.
Drive Belts
Inspect all drive belts for evidence
of cuts, cracks, excessive wear or oil
saturation and replace if necessary...