Hyundai Elantra: Sun Roof / Components and components location

1. Sunroof 2. Sunroof switch
| 3. Sunroof motor & controller
|
Other information:
Repair procedures
Replacement
•
When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. •
Take care not to bend or scratch the trim and panels. 1.Fold the rear seat back assembly [LH] (A) by pulling the folding lever in the direction of the arrow.2.Separate the..
Removal[Rear disc brake type]1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the rear wheel and tire (A) from the rear hub. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
•
Be careful not to damage the hub bolts when removing the rear wheel and tire (A).3..