Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Suspension System / Tire Pressure Monitoring System

Alignment

Repair procedures InspectionFront AlignmentWhen using a wheel alignment tester to check the alignment of the wheels, make sure that the vehicle is horizontal and the front wheels are pointing straight ahead...

Description and operation

Description The Tire Pressure Monitoring System (TPMS) monitors the pressure and temperature inside the tire in order to warn the driver of changes in pressure which may influence the operation of the vehicle...

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: In-car Sensor


Description and operation DescriptionThe In-car air temperature sensor is built in the heater & A/C control unit.The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the control unit regulates in-..

Hyundai Elantra (CN7) 2021-2025 Service Manual: Concentric Slave Cylinder Assembly


Repair procedures Removal1.Remove the manual transaxle assembly. (Refer to Manual Transaxle System - "Manual Transaxle")2.Loosen the bolts and then removing the concentric slave cylinder assembly (A) from the clutch housing. [Gasoline 1.6 MPI] Tightening torque : 19.6 - 26.5 N.m (2.0 - 2.7 kgf.m, 14.2 - 19.5 lb-ft)3.Loosen the bolts and then removing the concentric slave cylinde..

Categories

Air bag collision sensors

1. SRS control module/Rollover sensor
2. Front impact sensors
3. Side impact sensors (acceleration)
4. Side impact sensors (pressure)

read more

Copyright © 2025 www.helantra7.com