Hyundai Elantra: Auto Lighting Control System / Specifications
Items
|
Specifications
|
Rated voltage
| 5V
|
Load
| Max. 1mA (Relay load)
|
Illuminations (LUX)
| 100
| 0.76 ± 0.17V
|
150
| 1.3 ± 0.30V
|
Other information:
Repair procedures
RemovalOutside Combination Lamp1.Disconnect the negative (-) battery terminal.2.Remove the combination lamp cover (A).3.Disconnect the rear combination lamp connector (A).4.Loosen the mounting nuts and remove the rear conbination lamp (A).5.Remove the socket (A) and replace the bulb (B).Inside Combination Lamp1.Disconnect the negative (-) battery terminal.2.Remove the trunk li..
Components and components location
Component Location [This illustration shows the LHD type. RHD type is symmetrical.]1. Crash pad lower panel
Repair procedures
Replacement
•
When removing with a flat - tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. •
Put on gloves to ..