Hyundai Elantra: Clutch System / Specifications

Hyundai Elantra (CN7) 2021-2025 Service Manual / Clutch System / Specifications

Specifications

Item		Specification
Clutch operation method		Hydraulic type
Clutch cover	Type	Diaphragm spring
Clutch disc	Type	Dry single plate
	Facing diameter (Outer × inner) [Gasoline 1.6 MPI]	Ø210 ± 1 × Ø145＋1(Ø8.2677 ± 0.0394 × Ø5.7087 ＋0.0394)
	Clutch disc rivet depth [Gasoline 1.6 MPI]	1.1 - 1.6 mm (0.0433 - 0.0630 in.)
	Facing diameter (Outer × inner) [Gasoline 1.6 T-GDI / Gasoline 2.0 MPI]	Ø235 ± 1 × Ø155 ± 0.8 mm (Ø9.2520 ± 0.03937 × Ø6.1024 ± 0.0315 in.)
	Clutch disc rivet depth	Min 1.0 mm (0.03937 in.)
	Clutch disc rivet depth (Service standard)	0.3 mm (0.0118 in.)

Tightening Torques

Item	N.m	kgf.m	lb-ft
Clutch pedal mounting bolt & nut	16.7 - 25.5	1.7 - 2.6	12.3 - 18.8
Concentric slave cylinder mounting bolt	19.6 - 26.5	2.0 - 2.7	14.2 - 19.5
Clutch switch & ignition lock switch mounting nut	2.0 - 5.9	0.2 - 0.6	1.4 - 4.3
Clutch cover mounting bolt [Gasoline 1.6 MPI]	19.6 - 26.5	2.0 - 2.7	14.5 - 19.5
Clutch cover mounting bolt [Gasoline 1.6 T-GDI]	24.5 - 18.1	2.5 - 3.5	34.3 - 25.3
Clutch cover mounting bolt [Gasoline 2.0 MPI]	11.8 - 14.7	1.2 - 1.5	8.7 - 10.8

Lubricants

Items	Specified lubricants	Quantity
Input shaft spline	CASMOLY L9508	0.1 - 0.2g
Concentric slave cylinder assembly	KLUBER 9R100	As required
Clutch pedal shaft and bushings	Chassis grease SAE J310a, NLGI No.1	As required

Special service tools

Special Service Tools Tool (Number and name) Illustration Use 09411-1P000Clutch disc guideInstallation of the clutch disc...

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: Rear Seat Belt Retractor

Components and components location Component Location1. Rear seat belt retractor [LH]2. Rear seat belt retractor [RH] Repair procedures Replacement • When installing the belt, make sure not to damage the retractor...

Hyundai Elantra (CN7) 2021-2025 Owner's Manual: System operation

Ventilation 1. Select the Face Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. Heating 1. Select the Floor Level mode. 2. Set the air intake control to fresh mode...

Function malfunction and limitations

Function malfunction

When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.