| Special Service Tools |
|
Tool Name / Number
|
Illustration
|
Description
|
| Alternator pulley remover wrenchh 09373-27000 |
| Removal and installation of alternator pulley |
SpecificationIgnition System Ignition Coil Item Specification Primary Coil Resistance (Ω)0.
Repair procedures Removal1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad Lower Panel")3.Remove the steering column shroud panel.(Refer to Body - "Steering Column Shroud Panel")4.Disconnect the immobilizer connector (A) and press the locking pin (B) using an awl.
Description and operation DescriptionThe intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes. Components and components location Components Location1.