Hyundai Elantra: Seats / Seat Warmers
Front seat warmers
Seat warmers are provided to warm the
seats during cold weather.
WARNING
The seat warmers can cause a SERIOUS
BURN, even at low temperatures and
especially if used for long periods of
time.
Passengers must be able to feel if the
seat is becoming too warm so they can
turn it off, if needed.
People who cannot detect temperature
change or pain to the skin should
use extreme caution, especially the
following types of passengers:
- Infants, children, elderly or disabled
persons, or hospital outpatients.
- People with sensitive skin or who
burn easily.
- Fatigued individuals.
- Intoxicated individuals.
- People taking medication that can
cause drowsiness or sleepiness.
WARNING
NEVER place anything on the seat
that insulates against heat when the
seat warmer is in operation, such as a
blanket or seat cushion. This may cause
the seat warmer to overheat, causing a
burn or damage to the seat.
NOTICE
To prevent damage to the seat warmers
and seats:
- Never use a solvent such as paint
thinner, benzene, alcohol or gasoline
to clean the seats.
- Do not place heavy or sharp objects
on seats equipped with seat warmers.
- Do not change the seat cover. It
may damage the seat warmer or air
ventilation system.

While the engine is running, push either
of the switches to warm the driver’s seat
or front passenger’s seat.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the switches in the
OFF position.
• Manual temperature control
Each time you push the switch, the
temperature setting of the seat is
changed as follows:
-- Front seat

• Automatic temperature control
The seat warmer starts to
automatically control the seat
temperature in order to prevent
low-temperature burns after being
manually turned ON.

You may manually press the switch to
increase seat temperature. However, it
soon returns the automatic mode again.
- When pressing the switch for more
than 1.5 seconds with the seat warmer
operating, the seat warmer will turn
OFF.
- The seat warmer defaults to the OFF
position whenever the ignition switch
is in the ON position. However, if the
Auto Comfort Control function is ON,
the driver’s seat warmer will turn on
and off depending on the ambient
temperature.
- Auto Comfort Control (for driver’s
seat, if equipped)
The seat warmer automatically
controls the seat temperature
depending on the ambient
temperature when the engine is
running. If the seat warmer switch
is pushed, the seat warmer will have
to be controlled manually.To use this
function, it must be activated from
the Settings menu in the AVN system
screen. For more details, refer to the
separately supplied Car Infotainment
System manual.
The rear seats are equipped with head
restraints in all the seating positions for
the passenger’s safety and comfort.
Adjusting the height up and down
To raise the head restraint:
1...
This section describes how to use the
seat belts properly. It also describes
some of the things to avoid when using
seat belts...
Other information:
SpecificationsFront Suspension
Item
Specification
Suspension typeMacPherson StrutShock absorberTypeAdvanced Valve (RS Valve)Rear Suspension
Item
Specification
Suspension typeTorsion Beam AxleShock absorberTypeAdvanced Valve (RS Valve)Wheel & Tire
Item
..
Operating conditions
Navigation-based Smart Cruise Control
is ready to operate if all of the following
conditions are satisfied:
Smart Cruise Control is operating
Driving on main roads of highways (or
motorways)
Information
For more details on how to operate Smart
Cruise Control, refer to “Smart Cruise
Control (SCC)” section in chapter 7.
Function display and control
When Navigation-..