Hyundai Elantra: Blind-Spot Collision Warning (BCW) / Limitations of the function
Blind-Spot Safety system may not
operate normally, or the system may
operate unexpectedly under the
following circumstances:
- There is inclement weather, such as
heavy snow, heavy rain, etc.
- The rear corner radar is covered with
snow, rain, dirt, etc.
- The temperature around the rear
corner radar is high or low
- Driving on a highway (or motorway)
ramp
- The road pavement (or the peripheral
ground) abnormally contains metallic
components (i.e. possibly due to
subway construction)
- There is a fixed object near the
vehicle, such as sound barriers,
guardrails, central dividers, entry
barriers, street lamps, signs,
tunnels, walls, etc. (including double
structures)
- Driving in large areas where there are
few vehicles or structures (i.e. desert,
meadow, suburb, etc.)
- Driving through a narrow road where
trees or grass are overgrown
- Driving on a wet road surface, such as
a puddle on the road
- The other vehicle drives very close
behind your vehicle, or the other
vehicle passes by your vehicle in close
proximity
- The speed of the other vehicle is very
fast that it passes by your vehicle in a
short time
- Your vehicle passes by the other
vehicle
- Your vehicle changes lane
- Your vehicle has started at the same
time as the vehicle next to you and
has accelerated
- The vehicle in the next lane moves
two lanes away from you, or when the
vehicle two lanes away moves to the
next lane from you
- A trailer or carrier is installed around
the rear corner radar
- The bumper around the rear corner
radar is covered with objects, such as
a bumper sticker, bumper guard, bike
rack, etc.
- The bumper around the rear corner
radar is impacted, damaged or the
radar is out of position
- Your vehicle height is low or high
due to heavy loads, abnormal tire
pressure, etc.
Blind-Spot Safety system may not
operate normally, or the system may
operate unexpectedly when the
following objects are detected:
- A motorcycle or bicycle is detected
- A vehicle such as a flat trailer is
detected
- A big vehicle such as a bus or truck is
detected
- A moving obstacle such as a
pedestrian, animal, shopping cart or a
baby stroller is detected
- A vehicle with low height such as a
sports car is detected
WARNING
• Driving on a curve
Blind-Spot Safety system may not
operate properly when driving on
a curved road. The system may not
detect the vehicle in the next lane.
Always pay attention to road and
driving conditions while driving.
Blind-Spot Safety system may not
operate properly when driving on
the curved road. The system may
recognize the vehicle in the same
lane.
Always pay attention to road and
driving conditions while driving.
• Driving where the road is merging/
dividing
Blind-Spot Safety system may not
operate properly when driving where
the road merges or divides. The
system may not detect the vehicle in
the next lane.
Always pay attention to road and
driving conditions while driving.
• Driving on a slope
Blind-Spot Safety system may not
operate properly when driving on
a slope. The system may not detect
the vehicle in the next lane or may
incorrectly detect the ground or
structure.
Always pay attention to road and
driving conditions while driving.
• Driving where the heights of the
lanes are different
Blind-Spot Safety system may not
operate properly when driving where
the heights of the lanes are different.
The system may not detect the
vehicle on a road with different lane
heights (underpass joining section,
grade separated intersections, etc.).
Always pay attention to road and
driving conditions while driving.
WARNING
- When you are towing a trailer or
another vehicle, make sure that you
turn off Blind-Spot Safety system.
- Blind-Spot Safety system may not
operate normally if interfered by
strong electromagnetic waves.
- Blind-Spot Safety system may not
operate for 15 seconds after the
vehicle is started, or the rear corner
radars are initialized.
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain,
or installing a trailer or carrier, it can
reduce the detecting performance and
temporarily limit or disable Blind-Spot
Safety system...
Blind-Spot Collision-Avoidance Assist
is designed to help detect and monitor
approaching vehicles in the driver’s
blind spot area and warn the driver
of a possible collision with a warning
message and audible warning...
Other information:
Shift to P or N to start engine
(for smart key system)
This warning message is displayed if
you try to start the engine with the shift
button not in the P (Park) or N (Neutral)
position.
Information
You can start the engine with the shift
button in the N (Neutral) position...
Function warning and control
Rear Cross-Traffic Safety system will
warn and control the vehicle depending
on collision level: ‘Collision Warning’,
‘Emergency Braking’ and ‘Stopping
vehicle and ending brake control’.
Collision Warning
To warn the driver of an approaching
vehicle from the rear left/right side of
your vehicle, the warning light on the
outside rearview mirror..