Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Body Electrical System / Wireless Power Charger System

Repair procedures

Replacement1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad")3.Remove the steering column upper & Lower shroud...

Description and operating principle

Description and OperationWireless Power Charger SystemDuring ACC or IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile phone...

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: Purge Control Solenoid Valve (PCSV)


Description and operation DescriptionPurge Control Solenoid Valve (PCSV) is a solenoid valve and is installed on the surge tank and controls the passage between the canister and the intake manifold.The evaporative gases gathered in the canister are delivered to the intake manifold when the PCSV is open by ECM control signal...

Hyundai Elantra (CN7) 2021-2025 Service Manual: Accelerator Position Sensor (APS)


Description and operation DescriptionAccelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensors which adapt individual sensor power and ground line...

Categories

Air bag collision sensors

1. SRS control module/Rollover sensor
2. Front impact sensors
3. Side impact sensors (acceleration)
4. Side impact sensors (pressure)

read more

Copyright © 2025 www.helantra7.com