Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Sunroof / Sunroof opening and closing

To open or close the sunroof(manual slide feature), push the sunroof control lever backward or forward to the first detent position.

To open the sunroof (auto slide feature), push the sunroof control lever backward to the second detent position.

The sunroof will slide to the recommended open position before the maximum slide open position.

To stop the sunroof sliding at any point, push the sunroof control lever momentarily.

To open the sunroof to the maximum slide open position, press the lever towards the rear of the vehicle once again and hold it until the sunroof slide all the way open.

Information

To reduce wind noise while driving, we recommend you to drive at the recommended position before the maximum slide open position.

Automatic reverse

If an object or part of the body is detected while the sunroof glass is closing automatically, it will reverse the direction, and then stop.

The auto reverse function does not work if a tiny obstacle is between the sliding glass and the sunroof sash. You should always check that all passengers and objects are away from the sunroof before closing it.

WARNING

Small objects that can get caught between the sliding glass and the sunroof sash may not be detected by the automatic reverse system. In this case, the sunroof glass will not detect the object and will not reverse direction.

    Sunroof

    If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control switch located on the overhead console. The sunroof can only be opened, closed, or tilted when the ignition switch is in the ON position...

    Tilting the sunroof

    Tilt the sunroof open: Push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof: Press the sunroof lever forward until the sunroof moves to the desired position...

    Other information:

    Hyundai Elantra (CN7) 2021-2024 Service Manual: Dual Clutch Assembly


    Components and components location Components1. Dual clutch assembly2. Snap ring3. Spline hub4. Retaining ring Repair procedures Removal1.Remove the dual clutch transmission from the vehicle.(Refer to Dual Clutch System - "Repair procedures")2...

    Hyundai Elantra (CN7) 2021-2024 Owner's Manual: Function operation


    Function warning Rear Cross-Traffic Safety system will warn the driver when a collision is imminent. Collision Warning To warn the driver of an approaching vehicle from the rear left/right side of your vehicle, the outside rearview mirror will blink and a warning will appear on the cluster...

    Categories

    Function malfunction and limitations

    Function malfunction

    When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.

    read more

    Copyright © 2024 www.helantra7.com