Hyundai Elantra: Safe Exit Warning (SEW) / Function operation
Warning and control
.png)
Collision warning when exiting vehicle
- When an approaching vehicle from
the rear is detected, the ‘Watch for
traffic’ warning message will appear
on the cluster, and an audible warning
will sound.
- Safe Exit Warning will warn the driver
when your vehicle speed is below 2
mph (3 km/h), and the speed of the
approaching vehicle from the rear is
above 3 mph (5 km/h).
WARNING
Take the following precautions when
using Safe Exit Warning:
- For your safety, change the Settings
after parking the vehicle at a safe
location.
- If any other function’s warning
message is displayed or audible
warning is generated, Safe Exit
Warning warning message may not
be displayed and audible warning
may not be generated.
- You may not hear the warning
sound of Safe Exit Warning if the
surrounding is noisy.
- Safe Exit Warning does not operate
in all situations or cannot prevent all
collisions.
- Safe Exit Warning may warn the
driver late or may not warn the driver
depending on the road and driving
conditions. Always check vehicle
surroundings.
- The driver and passengers are
responsible for accidents that occurs
while exiting the vehicle. Always
check the surroundings before you
exit the vehicle.
- Never deliberately operate Safe
Exit Warning. Doing so may lead to
serious injury or death.
- Safe Exit Warning does not operate
if there is a problem with Blind-Spot
Safety system. The warning message
of Blind-Spot Safety system will
appear when:
-- Blind-Spot Safety system sensor or
the sensor surrounding is polluted
or covered
-- Blind-Spot Safety system fails to
warn passengers or falsely warn
passengers
Information
After the engine is turned off, Safe Exit
Warning operates approximately for 10
minutes, but turns off immediately if the
doors are locked.
Setting
Safe Exit Assist
With the engine on, select ‘Driver
Assistance → Blind-Spot Safety → Safe Exit
Assist (SEA)’ from the Settings menu to
turn on Safe Exit Warning and deselect to
turn off the function...
Function malfunction
When Safe Exit Warning is not working
properly, the ‘Check Blind-Spot Safety
system’ warning message will appear
on the cluster, and the system will turn
off automatically or the system will be
limited...
Other information:
Description and operation
The System may be limited when •
The radar sensor or camera is blocked with a foreign object or debris.•
The camera lens is contaminated due to tinted filmed or coated windshield, damaged glass, or stuck of foreign matter (sticker, bug, etc...
WARNING
Whenever leaving the vehicle or
parking, always come to a complete
stop and continue to depress the brake
pedal. Move the shift button into P
(Park) position, then apply the parking
brake, and place the ignition switch in
the LOCK/OFF position...