Hyundai Elantra: Keyless Entry And Burglar Alarm / Components and components location

Hyundai Elantra (CN7) 2021-2025 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Components and components location

Component Location

1. Hood switch
2. Burglar horn
3. Integrated body control unit (IBU)
4. Door lock / unlock buzzer

5. Front dodr lock actuator & switch
6. Rear dodr lock actuator & switch
7. Trunk lock actuator & switch

Description and operation

DescriptionBurglar Alarm State [B/A State] B/A State Description DISARM1) In "DISARM" state, no vehicle start inhibition...

Specifications

Specification Item Specification Power source3VOperating temperature-10°C ~ +60°CRF ModulationFSKLF ModulationASKRF frequency433...

Other information:

Hyundai Elantra (CN7) 2021-2025 Service Manual: Drive Belt Tensioner

Repair procedures Removal and Installation1.Remove the drive belt.(Refer to Drive Belt System - "Drive Belt")2.Remove the drive belt tensioner (A). Tightening torque Bolt (B) : 18.6 - 23.5 N.m (1.9 - 2.4 kgf.m, 13.7 - 17.4 lb-ft)Bolt (C) : 34...

Hyundai Elantra (CN7) 2021-2025 Service Manual: Front Driveshaft

Components and components location Components1. Driveshaft (LH)2. Dynamic damper3. Driveshaft (RH) Repair procedures Removal1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the front wheel and tire (A) from the front hub...

Function malfunction and limitations

Function malfunction

When High Beam Assist is not working properly, the ‘Check High Beam Assist (HBA) system’ or ‘Check HBA (High Beam Assist) system’ warning message will appear and warning light will illuminate on the cluster. Take your vehicle to an authorized HYUNDAI dealer and have the function checked.