Hyundai Elantra: Engine Mechanical System / Special service tools
Tool (Number and name)
|
Illustration
|
Use
|
Valve spring compressor (09222-3K000) Valve spring compressor adapter (09222-3K100)
| 
| Removal and installation of the intake / exhaust valve spring and retainer lock
|
Valve stem seal installer (09222-2B100)
| 
| Installation of the valve stem seal
|
Oil pan remover (09215-3C000)
| 
| Removal of oil pan
|
Crankshaft front oil seal installer (0K231-2C200)
| 
| Installation of the crankshaft front oil seal
|
Crankshaft rear oil seal installer (09231-2B200) Handle (09231-H1100)
| 
| Installation of the crankshaft rear oil seal
|
Ring gear stopper (09231-3N100) (09231-2B100)
| 
| Removal and installation of crankshaft damper pulley bolt
|
Troubleshooting
Symptom
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises...
Other information:
DescriptionIgnition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the memory of the ECM (Engine Control Module).The engine operating conditions (speed, load, warm-up condition, etc.) are detected by the various sensors. Based on these sensor signals and the ignition timin..
When your brake pads are worn and new
pads are required, you will hear a high
pitched warning sound from your front
or rear brakes. You may hear this sound
come and go or it may occur whenever
you depress the brake pedal.
Note that some driving conditions or
climates may cause a brake squeal
when you first apply (or lightly apply)
the brakes. This is normal and does not
indicate a problem..