Hyundai Elantra Owners and Service Manuals

Hyundai Elantra: Appearance Care. Exterior Care / Repairing your vehicle’s finish

Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense.

NOTICE

If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anticorrosion materials to the parts repaired or replaced.

NOTICE

Matte paint finish vehicle (if equipped) In case of matte paint finish vehicles, it is impossible to modify only the damaged area and repair of the whole part is necessary. If the vehicle is damaged and painting is required, we recommend that you have your vehicle maintained and repaired by an authorized HYUNDAI dealer. Take extreme care, as it is difficult to restore the quality after the repair.

    Protecting your vehicle’s finish

    Washing To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly and frequently at least once a month with lukewarm or cold water...

    Bright-metal maintenance. Underbody maintenance

    Bright-metal maintenance To remove road tar and insects, use a tar remover, not a scraper or other sharp object. To protect the surfaces of bright metal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster...

    Other information:

    Hyundai Elantra (CN7) 2021-2025 Owner's Manual: Locking your vehicle (Touch sensor type)


    1. Close all doors, engine hood and trunk. 2. Carry the smart key. 3. Either touch the touch sensor on the door handle (the engraved part) or press the Door Lock button (1) on the smart key. 4. The hazard warning lights will blink. 5. Make sure the doors are locked by pulling the door outside handle...

    Hyundai Elantra (CN7) 2021-2025 Service Manual: Repair procedures


    Removal1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the front wheel and tire (A) from the front hub. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)    • Be careful not to damage the hub bolts when removing the front wheel and tire (A)...

    Categories

    Tachometer

    The tachometer indicates the approximate number of engine revolutions per minute (RPM).

    Use the tachometer to select the correct shift points and to prevent lugging and/ or over-revving the engine.

    NOTICE

    Do not operate the engine within the tachometer's RED ZONE. This may cause severe engine damage.

    read more

    Copyright © 2025 www.helantra7.com