Hyundai Elantra: Hood / Hood Weatherstrip
Repair procedures
1. | Remove the hood weatherstrip (A). 
•
| Be careful not to scratch the hood weatherstrip. |
|
|
2. | To install, reverse the removal procedure. |
Components and components location
Component Location1. Hood latch assembly
Repair procedures
Replacement1.Remove the front bumper.(Refer to Front Bumper - "Front Bumper Assembly")2...
Other information:
DescriptionThe cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cruise, coast, accelerate and resume speed.It also has a safety interrupt, engaged upon depressing brake or shifting select lever.The ECM is the control module for this system. The main components of cruise control system are mode control sw..
Components and components location
Component Location 1. Rear door outside handle
Repair procedures
Replacement1.Remove the plug hole (A).2.Loosen the mounting screw (A) and then remove the rear door outside handle (B) by sliding it forward. Tightening torque : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)3.To install, reverse the removal procedure.
..